Chattering reduced sliding mode control for a class of chaotic systems

Nonlinear Dynamics - This paper presents a sliding mode control scheme for chaotic systems. Finite time stability of the system states is realized by implementing the proposed controller, which is...     

Self-supported metal sulphide nanocrystals-assembled nanosheets on carbon paper as efficient counter electrodes for quantum-dot-sensitized solar cells

Developing efficient counter electrodes (CEs) and quantum dots made of earth-abundant and non-toxic elements is essential but still challenging for quantum dot-sensitized solar cells (QDSSCs). Here, we report a facile strategy to prepare self-supported and robust CoS₂ and NiS nanocrystals-assembled nanosheets directly grown on carbon paper (MSx NS@CP) as efficient counter electrodes for QDSSCs. Such CEs integrate the merits of fast electron transfer from interconnected conductive scaffold, efficient mass transfer from hierarchically vertical nanosheet on 3D open substrate, as well as abundant highly active catalytic sites from metal sulphide nanocrystal units. As a result, QDDSCs based on such CoS₂ NS@CP and NiS NS@CP CEs achieve a PCE of 8.88% and 7.53%, respectively. The detailed analyses suggest that CoS₂ NS@CP has the highest catalytic activity and shows the lowest charger transfer resistance, leading to the highest PCE. These findings may inspire the design and exploration of other self-supported efficient CEs by integrating highly active catalysts onto 3D conductive networks for efficient QDSSCs.     

CsVO2F(IO3): An Excellent SHG Material Featuring an Unprecedented 3D [VO2F(IO3)]− Anionic Framework

The first alkali-metal vanadium iodate fluoride, CsVO₂F(IO₃), with a novel 3D anionic framework, has been rationally designed and hydrothermally synthesized. The 3D [VO₂F(IO₃)]⁻ framework in CsVO₂F(IO₃) is built from 0D Λ-shaped cis-[VO₃F(IO₃)₂]⁴⁻ polyanions via corner-sharing of oxo anions and bridging of the iodate groups. CsVO₂F(IO₃) displays both a strong second-harmonic generation (SHG) 1.1 times as strong as KTiOPO₄ (KTP) under 2.05 μm laser radiation and high laser-induced damage threshold (LIDT) of 107.9 MW cm⁻². This work provides a new route to design SHG crystals with stable 3D anionic structures from low-dimensional structural building units.     

Global dynamics of a flexible asymmetrical rotor

Nonlinear Dynamics - Global dynamics of a flexible asymmetrical rotor resting on vibrating supports is investigated. Hamilton’s principle is used to derive the partial differential governing...     

Crystal phase control in two-dimensional materials

It is the nature of crystals to exist in different polymorphs. The recent emergence of two-dimensional (2D) materials has evoked the discovery of a number of new crystal phases that are different from their bulk structures at ambient conditions, and revealed novel structure-dependent properties, which deserve in-depth understanding and further exploration. In this contribution, we review the recent development of crystal phase control in 2D materials, including group V and VI. transition metal dichalcogenides (TMDs), group IVA metal chalcogenides and noble metals. For each group of materials, we begin with introducing the various existing crystal phases and their structure-related properties, followed by a detailed discussion on factors that influence these crystal structures and thus the possible strategies for phase control. Finally, after summarizing the whole paper, we present the challenges and opportunities in this research direction.     

Topological multiplicity of the maximum eigenvalue of graph 1-Laplacian

In this paper, we reveal the connection between the independent number of a graph and the topological multiplicity of the maximal eigenvalue of the corresponding graph 1-Laplacian. The pseudo independent number of a graph is introduced, which provides a better lower estimate of the topological multiplicity of the maximum eigenvalue. The technique of our proof is based on the localization property of the eigenvector for graph 1-Laplacian, the Krasnoselski genus, and its relation to the topological join.     

Piezoelectric Actuator Placement Optimization and Active Vibration Control of a Membrane Structure

The placement optimization of piezoelectric actuators and active vibration control of a membrane structure are studied in this paper. The classical linear quadratic regulator controllers are designed to suppress the unwanted vibration. Simulation results indicate that the optimal locations of piezoelectric actuators are affected deeply by the additional mass and stiffness of actuators, the computational efficiency of particle swarm optimizer is higher than that of genetic algorithm for this particular problem, and the control performance of optimally placed actuators is better than that of non-optimally placed actuators.     

Simultaneous quantification of five biogenic amines based on LC–MS/MS and its application in honeybee venom from different subspecies

The use of honeybee venom in traditional medicine is increasing due to its unexpected beneficial effects in the treatment of diseases. In this study, a simple and environmentally friendly sample preparation procedure was developed to quantify five biogenic amines—histamine, 5-hydroxytryptamine, dopamine, adrenaline, and noradrenaline—in honeybee venom using high-performance liquid chromatography tandem mass spectrometry. The instrument and sample preparation method were optimized to achieve stable, sensitive, and accurate quantification of the five biogenic amines. The peak purities of five biogenic amines in bee venom were examined using a diode array detector to ensure that endogenous impurities will not interfere with biogenic amines during the chromatographic separation procedure. The correlation coefficient of each compound was higher than 0.998 in the range of 0.5–1000 ng/mL. The limits of detection and quantification of the developed method ranged between 0.09 and 0.17, and 0.3 and 0.59 μg/g, respectively. The average recoveries of spiked biogenic amines with different concentrations were higher than 70.95%, and the intra- and intermediate-day precisions were lower than 7.51% and 10.17%, respectively. The carry-over between each injection and the stability of the target analytes were also evaluated to ensure the effectiveness of this method. The data obtained are presented in various formats, including boxplot, heat map, and principal component analysis diagram, to visualize the differences in the biogenic amine contents of the honeybee venoms from different subspecies. This method hopes to provide the opportunity to distinguish the bee venom produced by different subspecies.     

UPLC–ESI–Q-TOF–MS/MS analysis of anticancer fractions from Ophiocordyceps xuefengensis and Ophiocordyceps sinensis

Ophiocordyceps xuefengensis (O. xuefengensis), a new species of caterpillar fungus, has been identified as the sister taxon of Ophiocordyceps sinensis (O. sinensis). The aims of the present study are to evaluate the anticancer activity and to qualitatively analyze the potential bioactive chemical constituents of O. xuefengensis and O. sinensis, comparatively. An MTT assay was used to evaluate the in vitro anticancer activities of different fractions from O. xuefengensis and O. sinensis. The results show that ethyl acetate fractions of O. xuefengensis and O. sinensis have significant in vitro anticancer activity. These two bioactive fractions were analyzed by ultra-performance liquid chromatography–electrospray ionization with quadrupole–time of flight tandem mass spectrometry technology. A total of 82 compounds and 101 compounds were identified or tentatively characterized in the bioactive fractions of O. xuefengensis and O. sinensis, respectively. Among these compounds, 68 existed in both O. xuefengensis and O. sinensis. A total of 67 compounds were reported in O. xuefengensis and 8 compounds were reported in caterpillar fungus for the first time. This is the first detailed comparative analysis of the in vitro anticancer activity and chemical ingredients between O. xuefengensis and O. sinensis. The application of this work will provide reliable fundamental pharmacological substances for the use of O. xuefengensis by Yao people.     

Characterization of the chemical constituents in Hongjingtian injection by liquid chromatography quadrupole time‐of‐flight mass spectrometry

Hongjingtian injection is made from Rhodiola wallichiana and used in the treatment of stable angina pectoris associated with coronary heart disease. In this study, the chemical constituents in Hongjingtian injection were comprehensively studied using liquid chromatography quadrupole time‐of‐flight mass spectrometry. A total of 49 compounds were identified or assumed, including 10 organic acids, nine phenylethanoids, 10 phenylpropanoids, two flavonoid glycosides, seven monoterpene glycosides, seven octylglycosides and four other types of compounds. The structures of seven compounds were confirmed by comparing their retention times, MS and UV spectra with the corresponding authentic standards. Amongst the 49 compounds, 35 were firstly found in R. wallichiana, while they have been reported in other species of the genus Rhodiola, including Rhodiola crenulata, Rhodiola sacra, Rhodiola rosea and Rhodiola kirilowii. The possible fragmentation pathways in the mass spectrometry of the major types of compounds are proposed and summarized. Our study demonstrates a rapid method for characterizing the chemical constituents present in the Hongjingtian injection, which could also be applied to the identification of chemical constituents in other TCM formulae containing R. wallichiana.